The test didn't work

Sorry it didn't work. Here's what to try, and when not to try again.

Try again, following AVILOO's routine

Follow the AVILOO card in the box. If anything here differs from the card, the card is right.

  • Open the driver's door and leave it open during the test.
  • On VW, Skoda, Cupra and Seat: unlock the bonnet before plugging in (no need to open it).
  • Push the box fully into the OBD-2 port. Unplug any other device first.
  • Start the car and put it briefly into Drive with the brake pressed, then back into Park.
  • Turn heating and air conditioning off. The car must not be charging.
  • At the flashing yellow light, fasten the driver's seatbelt.
  • Wait for solid green (about 3 minutes). Only then switch off, unbuckle, unplug and close the door.

Testing a Tesla, or want to know what each light means? It's all on our test help page.

If AVILOO doesn't recognise the car

If the test page says AVILOO doesn't recognise the car or the model, check it on AVILOO's vehicle list. If the model isn't there, it can't be tested yet, so please don't keep retrying.

If it is there, make sure the box has been on mains power so its software is up to date, then email techsupport@batteryhealthcheck.co.uk with the registration and we'll follow it up. A very new build is sometimes not recognised at first.

If the result hasn't come through

The test is only done at solid green; flashing green means the box is still sending. If the box was unplugged early, plug it back into power where it has signal: the result can arrive the next time it's switched on. A blue light while it's on mains means poor signal.

Give it until tomorrow before you test that car again. If you do test the same car again within 2 hours of a charged test, the repeat isn't charged.

If the test page says "Please don't test this car again for now"

AVILOO has flagged something about the car. Don't test it again: we'll be in touch about it.

Still not working?

Email techsupport@batteryhealthcheck.co.uk with the car's registration, the box serial number (on its label) and what the light did, and we'll look into it.